L45449 Bearing Dimensions
L45449 inch tapered roller bearing cone, paired with the L45410 cup: 29 mm (1.142 in) bore, 50.292 mm OD, 14.224 mm width (FULI catalog). Quote.
L45449 specifications
| Cone bore d | 29 mm (1.142 in) |
|---|---|
| Cone width B | 14.732 mm |
| Matching cup | L45410 |
| Cup outside diameter D | 50.292 mm (1.980 in) |
| Total width T | 14.224 mm (0.56 in) — assembled width of cup and cone |
| Seal / shield options | Open (cup and cone, no seals) |
| Material | GCr15 chrome bearing steel (rings and rolling elements) |
| Radial clearance | Set during mounting (adjustable, not a C-class value) |
| Load ratings | See the cone and cup pairs table below |
L45449 cone and cup pairs
| Cone | Cup | Bore d | OD D | Width T | Cr (kN) | C0r (kN) |
|---|---|---|---|---|---|---|
| L45449 | L45410 | 29 mm (1.142 in) | 50.292 mm (1.980 in) | 14.224 mm (0.56 in) | 28.7 | 36.6 |
Dimensions from FULI's catalog. A cone (inner ring with rollers and cage) and a cup (outer ring) make up one bearing; the pairs above are the matching numbers listed in FULI's catalog. Values from FULI's catalog; confirm for your application.
How to read the L45449 designation
| Segment | Meaning |
|---|---|
| L | Prefix L: light series (inch tapered roller bearing numbering) |
| 45449 | Series and part number of the cone; the matching cup has its own number, listed in the pairs table on this page |
L45449 interchange
L45449 is an inch tapered roller bearing cone. Inch tapered roller bearings are ordered by cone number and cup number. Most makers use the same cone and cup numbers for the same size, but always check the cup number as well. Send us the numbers on your old bearing and we confirm the match before quoting.
Brand names are trademarks of their respective owners. FULI is not affiliated with, authorized by or endorsed by these companies. Part numbers are shown for interchange reference only. FULI dimensions, load ratings and speeds come from the FULI catalog.
L45449 compared with nearby cone sizes
The L45449 cone has a 29 mm (1.142 in) bore and a cone width of 14.732 mm. FULI's catalog pairs it with cup L45410 (50.292 mm outside diameter, 14.224 mm total width).
The next smaller cone on this site is L44649, with a 26.988 mm bore (2.01 mm smaller) and cup L44610.
The next larger is 15117, with a 29.987 mm bore (0.99 mm larger) and cup 15245.
The metric tapered bearing on this site closest in bore is 320/28 (28 × 52 × 16 mm). Its sizes differ from the L45449 pair, so the two are not interchangeable; it is given only as a size reference.
| Cone | Cup | d × D × T | Cr (kN) |
|---|---|---|---|
| 7100 | 7204 | 25.4 × 51.994 × 15.011 mm | 26.7 |
| L44643 | L44610 | 25.4 × 50.292 × 14.224 mm | 28.3 |
| L44649 | L44610 | 26.988 × 50.292 × 14.224 mm | 28.3 |
| L45449 | L45410 | 29 × 50.292 × 14.224 mm | 28.7 |
| 15117 | 15245 | 29.987 × 62 × 19.05 mm | 46.8 |
| 15120 | 15243 | 30.213 × 61.912 × 19.05 mm | 44.6 |
| 14116 | 14276 | 30.226 × 69.012 × 19.845 mm | 50.6 |
Sizes and Cr from FULI's catalog; — = not listed on this site.
L45449 load ratings
L45449/L45410 has a dynamic load rating Cr of 28.7 kN and a static rating C0r of 36.6 kN in FULI's catalog. The ratings belong to the cone and cup as a pair; a different cup changes them.
Speed limits and weights for inch cones are not listed in the catalog; ask us and we send them with the quotation.
Values from FULI's catalog; confirm for your application.
L45449 size in inches and millimetres
L45449 is made to inch sizes. The 29 mm bore is 1.1417 in; the nearest common fraction is 1-1/8 in (28.58 mm). The millimetre values in the catalog are conversions of the inch sizes.
| Dimension | Millimetres | Inches |
|---|---|---|
| Cone bore d | 29 mm | 1.1417 in |
| Cup outside diameter D (L45410) | 50.292 mm | 1.9800 in |
| Total width T | 14.224 mm | 0.5600 in |
| Cone width B | 14.732 mm | 0.5800 in |
| Cup width C | 10.668 mm | 0.4200 in |
Converted at 1 in = 25.4 mm and rounded to four decimals.
Mounting L45449 (general guidance)
General guidance, not a FULI specification: on a turning shaft the cone is a tight fit on the shaft and the cup a lighter fit in the housing, so the cup can be moved when the bearing pair is adjusted. Inch bearing fits are given as shaft and housing limits in inches in the bearing makers' tables; follow the drawing of your machine.
Tapered roller bearings carry radial load and axial load in one direction, so L45449 is normally used as one of a pair, and the end play or preload is set at mounting.
If the outer ring turns and the shaft stands still, as in an idler pulley or a wheel hub, the fits are reversed: the housing gets the interference fit (for example N7 or P7) and the shaft a sliding one (g6 or h6).
Grease for L45449
FULI supplies tapered roller bearings rust-protected and normally without grease; grease is packed in when the bearing is mounted. Relubricating L45449/L45410 from the side takes about 3.58 g each time by the formula in our grease calculator: 0.005 × D × T = 0.005 × 50.29 × 14.22.
How FULI supplies L45449
L45449 is supplied as a cone, as a cup or as a complete cone and cup pair, as your order states. Where an order states a requirement for the total width T (14.224 mm for L45449/L45410), each set is checked on a height gauge before packing.
Rings are marked with a brand you are authorised to use, with the FULI brand, or left neutral, as your order states. The box is printed with the model, precision class and brand.
Inquiries that give only one number are the usual cause of a wrong quote, so write both the cone and the cup number, for example L45449/L45410.
Tools and guides for L45449
Typical applications
- Vehicle wheel hubs and axles
- Gearboxes and reducers
- Agricultural machinery
- Conveyor pulleys
FAQ
What size is L45449 in mm?
The L45449 cone has a 29 mm bore (1.142 in). With cup L45410 the bearing is 29 × 50.292 × 14.224 mm (d × D × T).
What is the difference between L45449 and 15117?
15117 has a 29.987 mm bore against 29 mm for L45449, and pairs with cup 15245 (29.987 × 62 × 19.05 mm) instead of L45410 (29 × 50.292 × 14.224 mm). The two are not interchangeable; order by the numbers on the old cone and cup.
How much grease does L45449/L45410 need?
About 3.58 g each time it is relubricated from the side (0.005 × 50.29 × 14.22). FULI ships it rust-protected without grease, so the first fill is made at mounting.
Which cup goes with the L45449 cone?
FULI's catalog pairs the L45449 cone with cup L45410. Tell us whether you need the cone, the cup or both when you send the inquiry.
Is L45449 the same size across brands?
L45449 is an inch tapered roller bearing cone number. Most makers use the same cone and cup numbers for the same size, but check the cup number too. Send us the numbers on your old bearing and we confirm the match.