14137A Bearing Dimensions
14137A inch tapered roller bearing cone, paired with the 14276 cup: 34.925 mm (1.375 in) bore, 69.012 mm OD, 19.845 mm width (FULI catalog). Quote.
14137A specifications
| Cone bore d | 34.925 mm (1.375 in) |
|---|---|
| Cone width B | 19.583 mm |
| Matching cup | 14276 |
| Cup outside diameter D | 69.012 mm (2.717 in) |
| Total width T | 19.845 mm (0.781 in) — assembled width of cup and cone |
| Seal / shield options | Open (cup and cone, no seals) |
| Material | GCr15 chrome bearing steel (rings and rolling elements) |
| Radial clearance | Set during mounting (adjustable, not a C-class value) |
| Load ratings | See the cone and cup pairs table below |
14137A cone and cup pairs
| Cone | Cup | Bore d | OD D | Width T | Cr (kN) | C0r (kN) |
|---|---|---|---|---|---|---|
| 14137A | 14276 | 34.925 mm (1.375 in) | 69.012 mm (2.717 in) | 19.845 mm (0.781 in) | 48.3 | 58.1 |
Dimensions from FULI's catalog. A cone (inner ring with rollers and cage) and a cup (outer ring) make up one bearing; the pairs above are the matching numbers listed in FULI's catalog. Values from FULI's catalog; confirm for your application.
How to read the 14137A designation
| Segment | Meaning |
|---|---|
| 14137A | Designation breakdown not available for this model. |
14137A interchange
14137A is an inch tapered roller bearing cone. Inch tapered roller bearings are ordered by cone number and cup number. Most makers use the same cone and cup numbers for the same size, but always check the cup number as well. Send us the numbers on your old bearing and we confirm the match before quoting.
Brand names are trademarks of their respective owners. FULI is not affiliated with, authorized by or endorsed by these companies. Part numbers are shown for interchange reference only. FULI dimensions, load ratings and speeds come from the FULI catalog.
14137A compared with nearby cone sizes
The 14137A cone has a 34.925 mm (1.375 in) bore and a cone width of 19.583 mm. FULI's catalog pairs it with cup 14276 (69.012 mm outside diameter, 19.845 mm total width).
The next smaller cone on this site is 2790, with a 33.338 mm bore (1.59 mm smaller) and cup 2720.
The next larger is 25877, with a 34.925 mm bore (0 mm larger) and cup 25820.
Cup 14276 is also listed with 14125A, 14116 and 14139, so the same housing bore can take a different cone if the shaft size changes.
The metric tapered bearing on this site closest in bore is 32007 (35 × 62 × 18 mm). Its sizes differ from the 14137A pair, so the two are not interchangeable; it is given only as a size reference.
| Cone | Cup | d × D × T | Cr (kN) |
|---|---|---|---|
| 15125 | 15245 | 31.75 × 62 × 19.05 mm | 44.6 |
| 15126 | 15245 | 31.75 × 62 × 19.05 mm | 44.6 |
| 2790 | 2720 | 33.338 × 76.2 × 23.812 mm | 75 |
| 14137A | 14276 | 34.925 × 69.012 × 19.845 mm | 48.3 |
| 25877 | 25820 | 34.925 × 73.025 × 23.812 mm | 72.3 |
| HM88649 | HM88610 | 34.925 × 72.233 × 25.4 mm | 66.5 |
| LM48548 | LM48510 | 34.925 × 65.088 × 18.034 mm | 48.2 |
Sizes and Cr from FULI's catalog; — = not listed on this site.
14137A load ratings
14137A/14276 has a dynamic load rating Cr of 48.3 kN and a static rating C0r of 58.1 kN in FULI's catalog. The ratings belong to the cone and cup as a pair; a different cup changes them.
Speed limits and weights for inch cones are not listed in the catalog; ask us and we send them with the quotation.
Values from FULI's catalog; confirm for your application.
14137A size in inches and millimetres
14137A is made to inch sizes. The 34.925 mm bore is 1-3/8 in. The millimetre values in the catalog are conversions of the inch sizes.
| Dimension | Millimetres | Inches |
|---|---|---|
| Cone bore d | 34.925 mm | 1.3750 in |
| Cup outside diameter D (14276) | 69.012 mm | 2.7170 in |
| Total width T | 19.845 mm | 0.7813 in |
| Cone width B | 19.583 mm | 0.7710 in |
| Cup width C | 15.875 mm | 0.6250 in |
Converted at 1 in = 25.4 mm and rounded to four decimals.
Mounting 14137A (general guidance)
General guidance, not a FULI specification: on a turning shaft the cone is a tight fit on the shaft and the cup a lighter fit in the housing, so the cup can be moved when the bearing pair is adjusted. Inch bearing fits are given as shaft and housing limits in inches in the bearing makers' tables; follow the drawing of your machine.
Tapered roller bearings carry radial load and axial load in one direction, so 14137A is normally used as one of a pair, and the end play or preload is set at mounting.
If the outer ring turns and the shaft stands still, as in an idler pulley or a wheel hub, the fits are reversed: the housing gets the interference fit (for example N7 or P7) and the shaft a sliding one (g6 or h6).
Grease for 14137A
FULI supplies tapered roller bearings rust-protected and normally without grease; grease is packed in when the bearing is mounted. Relubricating 14137A/14276 from the side takes about 6.85 g each time by the formula in our grease calculator: 0.005 × D × T = 0.005 × 69.01 × 19.84.
How FULI supplies 14137A
14137A is supplied as a cone, as a cup or as a complete cone and cup pair, as your order states. Where an order states a requirement for the total width T (19.845 mm for 14137A/14276), each set is checked on a height gauge before packing.
Rings are marked with a brand you are authorised to use, with the FULI brand, or left neutral, as your order states. The box is printed with the model, precision class and brand.
Inquiries that give only one number are the usual cause of a wrong quote, so write both the cone and the cup number, for example 14137A/14276.
Tools and guides for 14137A
Typical applications
- Vehicle wheel hubs and axles
- Gearboxes and reducers
- Agricultural machinery
- Conveyor pulleys
FAQ
What size is 14137A in mm?
The 14137A cone has a 34.925 mm bore (1.375 in). With cup 14276 the bearing is 34.925 × 69.012 × 19.845 mm (d × D × T).
What is the difference between 14137A and 25877?
25877 has a 34.925 mm bore against 34.925 mm for 14137A, and pairs with cup 25820 (34.925 × 73.025 × 23.812 mm) instead of 14276 (34.925 × 69.012 × 19.845 mm). The two are not interchangeable; order by the numbers on the old cone and cup.
How much grease does 14137A/14276 need?
About 6.85 g each time it is relubricated from the side (0.005 × 69.01 × 19.84). FULI ships it rust-protected without grease, so the first fill is made at mounting.
Which cup goes with the 14137A cone?
FULI's catalog pairs the 14137A cone with cup 14276. Tell us whether you need the cone, the cup or both when you send the inquiry.
Is 14137A the same size across brands?
14137A is an inch tapered roller bearing cone number. Most makers use the same cone and cup numbers for the same size, but check the cup number too. Send us the numbers on your old bearing and we confirm the match.