UCT215 Bearing Dimensions
UCT215 take up bearing unit: 75 mm bore, T215 housing + UC215 insert. Frame dimensions H 167 / L 232 mm, designation and size-equivalent codes.
UCT215 specifications
| Shaft diameter d | 75 mm |
|---|---|
| Dimension H | 167 mm |
| Dimension L | 232 mm |
| Dimension L1 | 140 mm |
| Dimension N2 | 70 mm |
| Insert width B | 77.8 mm |
| Seal / shield options | Sealed insert bearing (UC type) with cast iron housing |
| Material | Insert: GCr15 chrome bearing steel (rings and rolling elements); housing: cast iron |
| Precision | P0 (standard) |
| Radial clearance | C0 (standard); C3 on request |
| Load ratings | Load ratings for this model are being checked against FULI's catalog. Ask for them with the quote. |
Dimensions cross-checked against published catalogues; please confirm with your quote. Letters follow the dimension drawing in FULI's catalog; ask us for the drawing.
How to read the UCT215 designation
| Segment | Meaning |
|---|---|
| UC | Insert bearing with set-screw locking and spherical outside diameter |
| T | Take-up housing (slides in a frame to tension a belt or chain) |
| 2 | 200 series (light duty) |
| 15 | Bore code 15 → 75 mm bore. ISO bore code (00–03 = 10/12/15/17 mm; 04 and above = code × 5 mm). |
UCT215 interchange
UCT215 is a housed unit: a UC215 insert bearing in a T215 housing. The insert bearing dimensions follow ISO and interchange between manufacturers. Housing dimensions such as bolt hole spacing can differ between the JIS and ISO versions of the same designation, so please confirm the mounting dimensions with us before ordering.
Brand names are trademarks of their respective owners. FULI is not affiliated with, authorized by or endorsed by these companies. Part numbers are shown for interchange reference only. FULI dimensions, load ratings and speeds come from the FULI catalog.
UCT215 compared with nearby sizes and housings
UCT215 is a take-up unit that holds the UC215 insert on a 75 mm shaft: dimension H 167 mm, dimension L 232 mm, dimension L1 140 mm and dimension N2 70 mm.
UCT216 is the next larger size in the same series on this site: shaft d 80 mm (5 mm more), inner ring width B 82.6 mm (4.8 mm more), dimension H 184 mm (17 mm more) and dimension L 235 mm (3 mm more).
UCT214 is the next smaller size in the same series on this site: shaft d 70 mm (5 mm less), inner ring width B 74.6 mm (3.2 mm less), dimension H 167 mm (the same) and dimension L 224 mm (8 mm less).
| Model | Type | Main dimensions | Weight (kg) |
|---|---|---|---|
| UCT215 | take-up unit (this page) | d 75 · H 167 · L 232 mm | — |
| UCT214 | take-up unit | d 70 · H 167 · L 224 mm | — |
| UCT216 | take-up unit | d 80 · H 184 · L 235 mm | — |
Dimensions in mm from the model pages; weight from FULI's catalog, — = not listed on this site.
UCT215 load ratings
FULI's catalog has no load rating line for UCT215 itself, so none is given here. Ask us and we send the figures with the quotation.
UCT215 dimensions in inches
The nearest common inch shaft size to the 75 mm bore of UCT215 is 2-15/16 in (74.61 mm), 0.39 mm smaller than the bore, so UCT215 would be loose on it. An inch shaft needs an inch bore insert. Inch bore versions are made for some sizes; ask us with the shaft size.
| Dimension | Millimetres | Inches |
|---|---|---|
| Shaft diameter d | 75 mm | 2.9528 in |
| Dimension H | 167 mm | 6.5748 in |
| Dimension L | 232 mm | 9.1339 in |
| Dimension L1 | 140 mm | 5.5118 in |
| Dimension N2 | 70 mm | 2.7559 in |
| Insert width B | 77.8 mm | 3.0630 in |
Converted at 1 in = 25.4 mm and rounded to four decimals. The bearing itself is made to the millimetre sizes.
Mounting UCT215 (general guidance)
General guidance, not a FULI specification: insert bearings slide onto the shaft rather than being pressed on, and are held by their locking device. A shaft ground or drawn to h7 is common; a closer shaft such as js7 or j7 suits higher speed.
The UC215 insert in UCT215 is locked by set screws in the extended inner ring. Housed-unit problems usually start at the set screws: if the inner ring is not held, it turns on the shaft and wears it. Tighten each screw to the torque in the mounting instructions, and check them again after the first hours of running.
The housing of UCT215 slides in the guides of the frame. Set the belt or chain tension with the adjusting screw first, then lock the insert to the shaft.
Grease for UCT215
The insert in UCT215 is sealed on both sides and greased at the factory. If the housing has a grease fitting, add grease slowly through it while the shaft turns until a little fresh grease shows at the seals; general practice is to relubricate more often in wet or dusty places.
Greases for a stated temperature range can be specified on the order; for North America a range of −40 to 120 °C is often asked for.
How FULI supplies UCT215
FULI supplies UCT215 as a complete unit, or the UC215 insert on its own for replacement. Before packing, the factory checks the mounting torque, the fit of the insert in the housing, the radial clearance and that the base-to-centre height is consistent across the batch.
Rings are marked with a brand you are authorised to use, with the FULI brand, or left neutral, as your order states. The box is printed with the model, precision class and brand.
Inquiries that leave out the prefix or suffix letters are the usual cause of a wrong quote, so write the full designation, for example UCT215.
Tools and guides for UCT215
Typical applications
- Belt conveyor take-up (tail) pulleys
- Screw conveyors and bucket elevators
- Chain and belt tensioning on agricultural machinery
FAQ
What shaft size does UCT215 fit?
A 75 mm shaft (2.9528 in).
What is the difference between UCT215 and UCT216?
UCT216 is the next size up, for a 80 mm shaft, with inner ring width B 82.6 mm (4.8 mm more), dimension H 184 mm (17 mm more) and dimension L 235 mm (3 mm more). Choose UCT216 when the shaft is larger or the load is higher; the housings are not interchangeable.
Which insert fits UCT215?
The UC215 insert. It is sold on its own for replacement.
Does UCT215 come as a complete unit or insert only?
UCT215 is normally supplied as a complete unit (insert bearing already fitted in the housing). The insert can also be quoted separately if you are replacing only the bearing.
Where are the load ratings for UCT215?
Load ratings for UCT215 are being checked against FULI's catalog and are not shown on this page yet. Model pages with a "Load ratings & speed" table carry values from FULI's catalog.