UC207 Bearing Dimensions
UC207 insert bearing: 35 mm bore, 72 mm spherical OD, 42.9 mm width, set-screw lock (FULI catalog). Fits P207/F207/FL207/T207 housings. Quote.
UC207 specifications
| Bore d | 35 mm |
|---|---|
| Outside diameter D | 72 mm |
| Inner ring width B | 42.9 mm |
| Outer ring width C | 20 mm |
| Seal / shield options | Sealed insert bearing (UC type), spherical outside diameter, set-screw locking |
| Material | GCr15 chrome bearing steel (rings and rolling elements) |
| Precision | P0 (standard) |
| Radial clearance | C0 (standard); C3 on request |
Dimensions from FULI's catalog.
Load ratings & speed
| Dynamic load rating Cr | 25.7 kN |
|---|---|
| Static load rating C0r | 15.3 kN |
| Limiting speed, shaft js7 / j7 | 4,000 rpm |
| Limiting speed, shaft h7 | 3,000 rpm |
| Weight | 0.47 kg — approx. |
Values from FULI's catalog; confirm for your application.
How to read the UC207 designation
| Segment | Meaning |
|---|---|
| UC | Insert bearing with set-screw locking and spherical outside diameter |
| 2 | 200 series (light duty) |
| 07 | Bore code 07 → 35 mm bore. ISO bore code (00–03 = 10/12/15/17 mm; 04 and above = code × 5 mm). |
UC207 interchange
UC207 is an ISO designation. The boundary dimensions are identical across manufacturers; only suffixes (seals, clearance, cage) differ.
Brand numbers for UCP, UCF and UCFL units: Pillow Block Bearing Cross Reference.
Brand names are trademarks of their respective owners. FULI is not affiliated with, authorized by or endorsed by these companies. Part numbers are shown for interchange reference only. FULI dimensions, load ratings and speeds come from the FULI catalog.
UC207 compared with nearby sizes and housings
UC207 is a set-screw insert for a 35 mm shaft: outside diameter 72 mm, inner ring width 42.9 mm and outer ring width 20 mm.
The UC207 insert is the one fitted in UCP207 (pillow block unit), UCF207 (square flange unit) and UCFL207 (oval flange unit). Other inserts with the same size code are SB207 (35 × 72 × 32 mm) and SA207 (35 × 72 × 25.4 mm).
UC208 is the next larger size in the same series on this site: shaft d 40 mm (5 mm more), outside diameter D 80 mm (8 mm more) and inner ring width B 49.2 mm (6.3 mm more).
UC206 is the next smaller size in the same series on this site: shaft d 30 mm (5 mm less), outside diameter D 62 mm (10 mm less) and inner ring width B 38.1 mm (4.8 mm less).
| Model | Type | Main dimensions | Weight (kg) |
|---|---|---|---|
| UC207 | insert bearing (this page) | 35 × 72 × 42.9 mm (d × D × B) | 0.47 |
| UC206 | insert bearing | 30 × 62 × 38.1 mm (d × D × B) | 0.32 |
| UC208 | insert bearing | 40 × 80 × 49.2 mm (d × D × B) | 0.64 |
| SB207 | insert bearing | 35 × 72 × 32 mm (d × D × B) | — |
| SA207 | insert bearing | 35 × 72 × 25.4 mm (d × D × B) | — |
| UCP207 | pillow block unit | d 35 · H 47.6 · J 127 mm | 1.6 |
| UCF207 | square flange unit | d 35 · L 117 · J 92 mm | — |
| UCFL207 | oval flange unit | d 35 · L 161 · J 130 mm | — |
Dimensions in mm from the model pages; weight from FULI's catalog, — = not listed on this site.
UC207 weight, load ratings and speed
FULI's catalog gives about 0.47 kg for the insert, so 100 pieces of UC207 weigh about 47 kg before packing.
The catalog lists UC207 with a dynamic load rating of 25.7 kN and a static load rating of 15.3 kN. Its speed limits depend on the shaft tolerance: 4,000 rpm on a js7 or j7 shaft and 3,000 rpm on an h7 shaft. A closer shaft fit holds the inner ring more evenly, which is why the js7 / j7 figure is higher.
Values from FULI's catalog; confirm for your application.
UC207 dimensions in inches
The nearest common inch shaft size to the 35 mm bore of UC207 is 1-3/8 in (34.93 mm), 0.07 mm smaller than the bore, so UC207 would be loose on it. An inch shaft needs an inch bore insert. Inch bore versions are made for some sizes; ask us with the shaft size.
| Dimension | Millimetres | Inches |
|---|---|---|
| Bore d | 35 mm | 1.3780 in |
| Outside diameter D | 72 mm | 2.8346 in |
| Inner ring width B | 42.9 mm | 1.6890 in |
| Outer ring width C | 20 mm | 0.7874 in |
Converted at 1 in = 25.4 mm and rounded to four decimals. The bearing itself is made to the millimetre sizes.
Mounting UC207 (general guidance)
General guidance, not a FULI specification: insert bearings slide onto the shaft rather than being pressed on, and are held by their locking device. A shaft ground or drawn to h7 is common; a closer shaft such as js7 or j7 suits higher speed. For UC207 the catalog gives 4,000 and 3,000 rpm for the two cases.
UC207 is locked by set screws in the extended inner ring. Housed-unit problems usually start at the set screws: if the inner ring is not held, it turns on the shaft and wears it. Tighten each screw to the torque in the mounting instructions, and check them again after the first hours of running.
The spherical outside diameter of UC207 lets the insert swivel in the housing seat while it is being mounted, which takes up small errors in shaft line. It does not make the bearing a self-aligning bearing in service.
Grease for UC207
The insert is sealed on both sides and greased at the factory. Fitted in a housing with a grease fitting, it can be relubricated through the housing; on its own it runs on the factory fill.
Greases for a stated temperature range can be specified on the order; for North America a range of −40 to 120 °C is often asked for.
How FULI supplies UC207
FULI supplies UC207 on its own as a replacement insert, or fitted in a housing as a complete unit. The rings and balls are GCr15 chrome steel and the radial clearance is C0 as standard, with C3 on request.
Rings are marked with a brand you are authorised to use, with the FULI brand, or left neutral, as your order states. The box is printed with the model, precision class and brand.
Inquiries that leave out the prefix or suffix letters are the usual cause of a wrong quote, so write the full designation, for example UC207.
Tools and guides for UC207
Typical applications
- Replacement inserts for UCP / UCF / UCFL housings
- Conveyors
- Agricultural machinery
FAQ
What shaft size does UC207 fit?
A 35 mm shaft (1.3780 in).
What is the difference between UC207 and UC208?
UC208 is the next size up, for a 40 mm shaft, with outside diameter D 80 mm (8 mm more) and inner ring width B 49.2 mm (6.3 mm more). Choose UC208 when the shaft is larger or the load is higher; the housings are not interchangeable.
Which housings fit the UC207 insert?
UCP207 (pillow block unit), UCF207 (square flange unit) and UCFL207 (oval flange unit) all use UC207. Order UC207 on its own to replace a worn insert in any of them.
What is the difference between UC207 and SB207?
Both fit a 35 mm shaft with a 72 mm outside diameter. UC207 has an inner ring 42.9 mm wide and SB207 32 mm. Both lock with set screws. Check that the narrower or wider ring clears the housing and the parts beside it on the shaft.
How much does UC207 weigh?
About 0.47 kg in FULI's catalog; 100 pieces weigh about 47 kg before packing.
Can UC207 be ordered as an insert only, or as a complete unit?
Both. UC207 can be supplied on its own as a replacement insert for an existing housing, or fitted in a housing such as the UCP207 pillow block or UCF207 square flange and supplied as a complete unit. Tell us which you need when you send the inquiry.